KERN FCB User Manual

FCB-BA-e-1614
24
9.3 Description of individual menu items
Weighing Units
 In weighing mode keep the PRINT key pressed until [Unit]
appears.
0.0
g
Vn
T
 Press SET key, the selected unit is displayed.
 Use the MODE key to select between the different units (see
following table).
 Use the SET key to confirm the selected unit
Display
Conversion factor
1 g =
Gram
g
1.
Ounce
oz
0.035273962
Troy ounce
ozt
0.032150747
Pound
lb
0.0022046226
Tael Hongkong
tlh
0.02671725
Tael Taiwan
tlt
0.0266666
Grain (dependent on model)
gn
15.43235835
Pennyweight
(dependent on model)
dwt
0.643014931
Momme
(mom)
0.2667
Tola
tol
0.0857333381
Carat (dependent on model)
ct
5
Freely selectable factor *)
FFA
xx.xx
*) Input conversion factor
 As specified above, press repeatedly the MODE key until „FFA“
appears.
 To enter the factor, press the SET key; the enabled digit starts
flashing.
Using the MODE button, the displayed value is increased by 1,
with the PRINT button it is reduced by 1.
With the TARE key selection of the number to the left.
 Confirm input by pressing the SET key.
 Press repeatedly the SET key to take over the „Freely
selectable factor“ as current weighing unit.

KERN FCB Specifications

General

Calibration	External
Weighing plate material	Stainless steel
Protection Class	IP54
Weighing units	g, kg, lb, oz
Display	LCD, with backlight
Power supply	AC Adapter / Batteries
Operating temperature	10 °C - 40 °C
Minimum part weight at piece counting (Counting scale)	0.1 g