KERN FCB

FCB-BA-e-1614
30
Reset to
factory setting
0.0
g
Vn
T
RST
This function resets all balance settings to factory setting.
 In weighing mode keep the PRINT key pressed until [Unit]
appears.
 Press the MODE button several times until „rSt“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
rSt
yes
Balance will be reset to factory setting.
rSt
no
The balance keeps its individual setting
 Use the SET key to confirm selection. The balance returns to
weighing mode.