CountingFTC-BA-e-0720
22User manual ME-Nr.22017145 01/07
3.7.3 Counting with an auxiliary scale
Note This configuration allows counting of diverse parts, for example very small parts on
one scale and large parts on the other scale.
Prerequisite
The connected second scale is configured as an auxiliary scale. The scale doesn’t
change automatically but only after pressing the key.
1. Activate the appropriate scale.
2. Place the reference parts on this scale and press or .
The scale determines the average piece weight and changes to the display in
pieces (PCS).
3. Place the parts to be counted on the same scale.
The number of pieces is displayed.
To Next Page
Loading...
Need help?
General
