PES/PEJ-BA-e-1316
An acoustic signal sounds, the saved
lower weighing value is briefly displayed.
The flashing display (last saved value)
prompts you to enter the upper limiting
value
8. To enter the numeric value for the
upper limiting value, repeat steps 5 -
6
9. Save:
The balance returns to tolerance weigh-
ing mode.
From here evaluation takes place
whether the goods to be weighed are
within the two tolerance limits.
An acoustic signal sounds, the saved
upper limit is briefly displayed.
To enter 3 or 4 limiting values [ ] - [ ] or [ ], repeat steps 5 to 7
(see also chapter 12.4.2).
To Next Page
Loading...
