KERN PES 620-3M

PES/PEJ-BA-e-1316
23
6.9.3. Automatic adjustment (only PEJ)
After switching on the balance, the automatic adjustment starts with the internal ad-
justment weight.
Switch on the balance using ON/OFF.
The balance carries out a selftest, „M“
will be displayed flashing.
After that the automatic adjustment
starts:
„Aut. CAL“ appears flashing,
followed by „CH. 0“ and „CH. F.S.“
If „End“ is displayed, the automatic ad-
justment has been concluded success-
fully.
The balance changes into weighing
mode thus being ready for weighing.





g