KERN PLS Series

To Next Page

To Previous Page

26 TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112

 Reinstall any transport locks, if present.



Protect all the parts, e.g. glass wind breaker, scale plates, power

supply etc. from slipping and damage.

Main Page

Table of Contents2
Technical Specification5
Declaration of Conformity15
Device Overview16
Parts16
Operating Controls20
Keyboard Overview20
Navigation Buttons / Introducing the Numerical Value21
Display Overview22
User Interface23
Basic Instructions24
Intended Use24
Non-Intended Use24
Warranty24
Testing Equipment Supervision24
Basic Safety Instructions25
Compliance with the Instructions Included in the User Manual25
Personnel Training25
Transport and Storage25
Checking During Reception25
Packaging / Return Transport25
Unpacking, Positioning and Start-Up28
Installation Place, Operation Place28
Unpacking and Check29
Setting29
Power Supply33
Operation with Battery Supply (Solely the Model PLS 420-3F)33
Operator Language Selection34
Connecting Peripherals34
Adjustment34
Adjustment Mode Selection35
Automatic Adjustment Using the Internal Weight36
Adjustment Using the Internal Weight after the Model CAL Button Is Pressed (Models ALJ/PLJ)37
Adjustment Using the External Weight38
Changing the Weight of the Internal Calibration Weight39
Adjustment Report Display/Print40
Verification41
Basic Mode42
Switching the Scale on and off42
Resetting42
Ordinary Weighing43
Weighing Range Indicator43
Taring44
Weighing Using the Under-Scales Weighing Hanger45
Setup Menu46
Weight Units (Unit1/Unit2)49
Transmission Speed51
Auto Zero52
Filter53
Stability53
Setting the Display Contrast54
Display Backlight55
Automatic Switch-Off Function55
Setting Time and Date56
User Interface Language57
Main Menu "Applications58
Counting the Number of Pieces59
Determining the Reference Value by Weighing59
Introducing the Reference Weight in the Numerical Value62
Automatic Optimization of the Reference Value63
Determining Density Using the Equipment for the Under-Scales Weighing Hanger64
Determining Solid Body Density Using the Equipment for the Under-Scales Weighing Hanger64
Liquid Density Determination68
Formulation70
Free Formulation70
Formulation Defining and Implementation72
Test Weighing81
Determining the Percentage Value84
Entering the Reference Weight by Weighing84
Introducing the Reference Weight in the Numerical Value85
Weighing Animals86
Peak Value Function87
GLP Function (Good Laboratory Practice)88
RS-232C Interface90
Technical Specification90
Use of the Scale Plug Pins90
Interface91
Printer Connection92
Data Transmission92
Data Transmission Formats92
Remote Control Command94
Error Messages95
Maintenance, Service and Disposal95
Cleaning95
Maintenance and Service95
Disposal96
Help for any Minor Failures96
Ionizing Unit (Factory Option for KERN ALJ-A03)97
General Information97
Basic Safety Instructions97
Technical Specification99
Device Overview99
Start100
Intended Use101
Cleaning101

KERN PLS Series - Page 26

Table of Contents

Related product manuals