KERN PLS Series - Page 66

66 TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112

After the optional printer is connected, the indication value can be printed by
pressing the PRINT button.
Sample printout (KERN YKB-01N):
23-08-20 11:14:57
d: 8.0700 g/cm
3
If there are any errors when determining the density, “d-----” will be
displayed.
 Return to the density determination mode, pressing the MENU button.
 Return to the weighing mode, pressing the ON/OFF button.