Training and Operating Instructions
18
EN
Quick Start (For Familiarising)
Quick Start:
Without Particular Settings
• Press “QUICKSTART”.
Last user is displayed
or
Select person
“MANUAL” programme is started. The training time counts upwards.
• Pedal
Cadence, speed, distance and energy consumption count upwards.
Pulse, if a pulse measurement is active.
The current bar changes every 15 seconds.
Changing Load
• “Encoder right”
Load is increased in single steps.
• “Encoder left”
Load is decreased in single steps.
Interruption to Training
• Press “START STOP”
The average value (Ø) of the load is briefly displayed. Cadence and
speed display “0 values”
The training time TIME and STOP are displayed as flashing.
Continuing Training
• Press “START STOP”
• Pedal
or
End of Training and Standby Mode
The display switches to standby mode with temperature display 4
minutes after training has ended.
It is possible to continue the last training session if the display is reac-
tivated by pressing a button or pedalling.
To Next Page
Loading...
