Key-Disp KD58C User Manual

Details on power supply, current ratings, operating temperatures, and dimensions.

Visual description and dimensional drawings of the eBike display.

Overview of display features and their visual placement.

Explains button functions and provides installation guidance.

Turning system on/off, interface navigation, push-assistance, and lighting control.

Selection and adjustment of motor power assist levels.

Information on power output indication and error code meanings.

Options to clear trip data and switch between metric (KM) and imperial (Mile) units.

Setting the display's wheel diameter for accurate speed readings.

Configuring speed limits and battery voltage display.

Customizing assist level modes and their power output ratios.

Configuring over-current cut, PAS sensor, and speed sensor parameters.

Adjusting slow start behavior and display backlight brightness.

Procedures for entering the password and enabling/disabling the feature.

Steps to set a new password for system startup.

Instructions for resetting the display to factory default configurations.

Details the pinout and function of the display's wire connectors.