Tianjin Key-Disp Technology Co.,Ltd
◆Switching Push-assistance Mode On/Off
To activate the push-assistance function, keep holding the “-” button. After 2s, The E-
bike’s drive is activated at a speed of less than 6 Km/h while the screen displays “ ”. The
push-assistance function is switched off as soon as you release the “-” button on the
operating unit .The E-bike system stops the power output immediately.
Push-assistance Mode
■Push-assistance function may only be used when pushing the E-bike.
Be aware of danger of injury when the wheels of the E-bike do not have ground contact
while using the push-assistance function.
◆Switching the Lighting On/Off
To switch on the bike light, hold the + button. The backlight brightness is automatically
reduced. Hold the + button again, the lighting can be switched off.
Switching the Lighting Mode On/Off Interface
User
Manual-KD718
To Next Page
Loading...
