2-2. Stop sourcing continuous current/voltage sinusoid waveform
If you are sourcing a continuous waveform and you want to stop sourcing it, perform the
following procedure.
1) If you are not on the top Function menu, press repeatedly until you are back
at the top level.
2) Press , , , and then press to stop sourcing the continuous
arbitrary waveform.
At the top level of the Function menu
No tree structure is visible
A tree structure is visible
At a lower level in the Function menu
(1) Press Trigger
(2) Press Abort
(3) Press Trans.
(4) Press Ch 1
16 | Keysight | Sourcing Precise Current/Voltage Sinusoidal Waveforms Using the B2961A/62A – Demo Guide
To Next Page
Loading...
Need help?
General
