Series E4360 Service Guide 11
2
Performance Verification
Verification Description .............................................................. 12
Verification Procedure ................................................................ 14
Constant Current Tests .............................................................. 17
Test Record Forms...................................................................... 20
The verification procedures described in this chapter verify that the
Keysight E4360 Series Solar Array Simulator is operating normally and is
within published specifications.
NOTE
Perform the verification tests before calibrating your solar array
simulator. If the solar array simulator passes the verification tests, the
unit is operating within its calibration limits and does not need to be re-
calibrated.
To Next Page
Loading...
Need help?
General
