Keysight Technologies E4360 Series Service Guide

Series E4360 Service Guide 7
1
Introduction
Returning an Instrument .............................................................. 8
Instrument Identification .............................................................. 8
Firmware Upgrade ........................................................................ 9
Th
is manual discusses the troubleshooting procedures for the E4360
Series Solar Array Simulator. Troubleshooting procedures are provided
to isolate defective assemblies. These procedures do not troubleshoot to
the component level.
No procedures are provided for troubleshooting individual modules -
other than identifying if a specific module is defective. If you have a
defective module, you can return it to Keysight Technologies for repair or
replacement. Refer to the following note.
NOTE
You can contact Keysight Technologies at one of the following
telephone numbers for warranty, service, or technical support
information.
In the United States: (800) 829-4444
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or use our Web link for information on contacting Keysight in your
country or specific location: www.keysight.com/find/assist
Or contact your Keysight Technologies Representative.
The web contains the most up to date version of the manuals. Go to
http://www.keysight.com/find/E4360
under Technical Support to get
the latest version of the manuals.

Keysight Technologies E4360 Series Specifications

General

Brand	Keysight Technologies
Model	E4360 Series
Category	Switch
Language	English