Keysight Technologies E4360 Series - General Information

2 Performance Verification
20 Series E4360 Service Guide
Test Record Forms
Test Record Form – Keysight E4361A
Keysight Model E4361A Report No _______________ Date __________________
Description Minimum Specs. Results Maximum Specs.
Constant Voltage Tests
Voltage Programming & Readback
Min. Voltage Vout
Voltage measured over interface
High Voltage Vout
Voltage measured over interface
− 25 mV
Vout − 25 mV
59.93 V
Vout − 73 mV
__________
__________
__________
__________
+ 25 mV
Vout + 25 mV
60.07 V
Vout + 73 mV
CV Load Effect
− 2 mV
__________ + 2 mV
CV Source Effect
− 2 mV
__________ + 2 mV
CV Ripple and Noise (at full and no load)
peak-to-peak (Fixed mode)
rms (Fixed mode)
peak-to-peak (SAS & Table mode)
rms (SAS & Table mode)
N/A
N/A
N/A
N/A
__________
__________
__________
__________
+ 150 mV
+ 24 mV
+ 125 mV
+ 20 mV
Constant Current Tests
Current Programming & Readback
Min. Current Iout
Current measured over interface
High Current Iout
Current measured over interface
−Current measured over interface
− 20 mA
Iout − 20 mA
8.463 A
Iout − 37 mA
Iout − 50 mA
__________
__________
__________
__________
__________
+ 20 mA
Iout + 20 mA
8.537 A
Iout + 37 mA
Iout + 50 mA
CC Load Effect
− 1 mA
__________ + 1 mA
CC Source Effect
− 1 mA
__________ + 1 mA
Test Description E4361A Setting
Voltage Programming & Readback, Min 0 mV, 8.67 A
Voltage Programming & Readback, High 60 V, 8.67 A
CV Load Effect, Source Effect, Ripple and Noise 60 V, 8.67 A; Rload for ripple & noise= 7.1Ω
Current Programming & Readback, Min 0 mA, 61.5 V
Current Programming & Readback, High 8.5 A, 61.5 V
CC Load Effect, Source Effect 8.5 A, 61.5 V
SAS Curve settings for Ripple and Noise tests Isc = 8.5; Imp = 8.5; Vmp = 60; Voc = 65