6 1000 X-Series Oscilloscopes Service Guide
Contents
Test External Trigger Sensitivity / 36
Keysight 1000 X-Series Oscilloscopes Performance Test
Record / 39
3 Calibrating and Adjusting
User Calibration / 42
To perform User Cal / 42
User Cal Status / 42
4 Troubleshooting
Solving General Problems with the Oscilloscope / 44
If there is no display / 44
If there is no trace display / 44
If the trace display is unusual or unexpected / 44
If you cannot see a channel / 45
Verifying Basic Operation / 46
To power-on the oscilloscope / 46
To perform hardware self test / 46
To perform front panel self test / 47
To verify default setup / 47
To perform an Auto Scale on the Probe Comp signal / 49
To compensate passive probes / 50
5 Replacing Assemblies
6Replaceable Parts
7 Safety Notices
Warnings / 56
To clean the instrument / 57
Safety Symbols / 58
To Next Page
Loading...
Need help?
General
