Keysight Technologies M9037A Startup Guide

21 Keysight M9037A PXIe Embedded Controller Startup Guide
Upgrading from the M9036A
Upgrading from the M9036A
If you already have a Keysight M9036A Embedded Controller and you are
upgrading to an M9037A, be aware of the following:
- The GPIB cables are not compatible.
- The video output and cables are not compatible.
- The IVI and LabVIEW API drivers and the Soft Front Panel software are not the
same. You will need to update any programs/applications you have written
and rebuild them. The IVI Driver syntax (for the Trigger driver) M9036A used
AgM9036Trigger... (for example,
AgM9036TriggerRouteTrigggerBusToExternal) but the M9037A
uses AgPxiPxTrigger.... Other than the prefix, the commands are
identical.
- The M9037A Trigger Output has a mild pull-down (via a 100 K resistor) to ~0
V. The M9036A Trigger output floated to ~3 V.

Keysight Technologies M9037A Specifications

General

Brand	Keysight Technologies
Model	M9037A
Category	Controller
Language	English