Keysight Technologies N9010B-526 User Manual

570 N9030B PXA Signal Analyzer Service Guide
Post-Repair Procedures
Post-Repair Procedures
Figure 17-11 FPGA Programming Utility
8. To program the FPGA code enter 1 and press Enter. You will need to
confirm this selection by pressing 1 and Enter one more time.
9. The programming of the FPGA code could take a few minutes to complete.
Once it has finished the instrument will reboot itself to use the new code
and this process will then be completed.

Keysight Technologies N9010B-526 Specifications

General

Brand	Keysight Technologies
Model	N9010B-526
Category	Measuring Instruments
Language	English