*TST? Self-test query.
*WAI Pauses additional command processing until all pending operations are complete.
INITiate
[:IMMediate]
îîîîîîîîîîîî:ACQuire Initiates the measurement trigger system.
îîîîîîîîîîîî:ELOG Initiates external data logging.
îîîîîîîîîîîî:TRANsient Initiates the transient trigger system.
îîîîîî:CONTinuous
îîîîîîîîîîîî:TRANsient 0|OFF|1|ON Continuously initiates the transient trigger system.
INSTrument
îîîîîî:GROup
îîîîîîîîîîîî:FUNCtion MASTer|NONE|SLAVe Set the master/slave function
îîîîîîîîîîîî:MASTer
îîîîîîîîîîîîîîîîîî:CONNect
[:STATe] 0|OFF|1|ON Connects the master to previously discovered slave units
îîîîîîîîîîîîîîîîîîîîîîîî:DELay <delay> Specifies an auto-connect delay after power-on
îîîîîîîîîîîîîîîîîîîîîîîî:MODE AUTO|MANual Automatic connect at power-on or by command
îîîîîîîîîîîîîîîîîî:DISCover Discovers bus or LAN connected slave units
îîîîîîîîîîîîîîîîîî:RESet Reset the master configuration
îîîîîîîîîîîî:SLAVe
îîîîîîîîîîîîîîîîîî:ADDRess <bus address> Sets the slave bus address
LXI
îîîîîî:IDENtify
[:STATe] 0|OFF|1|ON Turns the front panel LXI identify indicator on or off.
îîîîîî:MDNS
[:STATe] 0|OFF|1|ON Sets the MDNS state
MEASure
[:SCALar]
îîîîîîîîîîîî:CURRent
[:DC]? Takes a measurement; returns the averaged current.
îîîîîîîîîîîîîîîîîî:ACDC? Takes a measurement; returns the RMS current (AC + DC).
îîîîîîîîîîîîîîîîîî:HIGH? Takes a measurement; returns the High level of a current pulse.
îîîîîîîîîîîîîîîîîî:LOW? Takes a measurement; returns the Low level of a current pulse.
îîîîîîîîîîîîîîîîîî:MAXimum? Takes a measurement; returns the maximum current.
îîîîîîîîîîîîîîîîîî:MINimum? Takes a measurement; returns the minimum current.
îîîîîîîîîîîî:POWer
[:DC]? Takes a measurement; returns the averaged power.
îîîîîîîîîîîîîîîîîî:MAXimum? Takes a measurement; returns the maximum power.
îîîîîîîîîîîîîîîîîî:MINimum? Takes a measurement; returns the minimum power.
îîîîîîîîîîîî:VOLTage
1 Quick Reference
26 Keysight RP7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
