14 Keysight 16860 Series Portable Logic Analyzers Installation/Quick Start Guide
1 First-Time Set Up
First-Time Set Up On 16860 Series Logic Analyzers
The first time you turn on a 16860 series logic analyzer (shipped with
Windows 10 installation), you are automatically logged on to the system
using the Administrator account and the Windows 10 desktop is displayed.
Note: Windows 10 support has been added to the 16860-series logic
analyzers and these are now shipped from the factory with Windows 10
operating system preinstalled. Earlier, Windows 7 operating system
was preinstalled on these logic analyzers. I
Once you are logged on to the system, you must set the following logic
analyzer configurations based on how you want to use your logic analyzer.
You use the standard Windows 10 procedures to set these configurations.
Table 2 Logic Analyzer Configurations on a 16860 Series Logic Analyzer with Windows 10
Installation
Configuration Task Logic Analyzer Usage
Standalone (No LAN) Workgroup Domain
Protect your instrument’s PC N/A Turn on Automatic Updates Turn on Automatic Updates
Specify computer name If your organization has a standard naming scheme, use that scheme. Otherwise, choose a descriptive
name (less than 15 characters)
Specify the administrator password Keysight recommends entering an administrator password for administrator accounts. See page 16 for
actions that require administrator accounts.
Specify the domain name (if applicable) No
(Is given WORKGROUP
membership)
No
(Is given WORKGROUP
membership)
Yes
Enter the domain name the logic
analyzer will log onto.
Enter your domain settings. N/A N/A Enter the name/password of the
user who can add the logic analyzer
to the domain.
Configure connectivity to the Internet N/A N/A Choose the appropriate Internet
connectivity.
Set up a high-speed connection N/A N/A Enter either the fixed IP/DNS
assigned by your network
administrator or select “Obtain
Automatically”.
To Next Page
Loading...
