Keysight 33210A - Page 160

158
Chapter 4 Remote Interface Reference
SCPI Command Summary
4
These commands require Option 001, External Timebase Reference (see
page 247 for more information).
PHASe {<angle>|MINimum|MAXimum}
PHASe? [MINimum|MAXimum]
PHASe:REFerence
PHASe:UNLock:ERRor:STATe {OFF|ON}
PHASe:UNLock:ERRor:STATe?
UNIT:ANGLe {DEGree|RADian}
UNIT:ANGLe?
(see page 259 for more information)
*STB?
*SRE <
enable value>
*SRE?
STATus
:QUEStionable:CONDition?
:QUEStionable[:EVENt]?
:QUEStionable:ENABle <
enable value>
:QUEStionable:ENABle?
*ESR?
*ESE <
enable value>
*ESE?
*CLS
STATus:PRESet
*PSC {0|1}
*PSC?
*OPC
Phase-Lock Commands
Status Reporting Commands
33210A users guide.book Page 158 Wednesday, July 16, 2008 11:16 AM