170
Chapter 4 Remote Interface Reference
Using the APPLy Command
4
APPLy?
Query the function generator’s current configuration and return a
quoted string. The purpose of this command is to allow you to append
this query response to an APPL: command in your programming
application and use the result to place the function generator in the
specified state. The function, frequency, amplitude, and offset are
returned as shown in the sample string below (the quotation marks are
returned as part of the string).
"SIN +5.0000000000000E+03,+3.0000000000000E+00,-2.5000000000000E+00"
33210A users guide.book Page 170 Wednesday, July 16, 2008 11:16 AM
To Next Page
Loading...
