1 3458A Calibration Introduction
20 Keysight 3458A Calibration Manual
Introduction
This manual provides operation verification procedures, adjustment procedures,
and performance verification procedures for the 3458A multimeter.
The manual contains five chapters and two appendixes.
Chapter 1: Introduction describes the manual contents and calibration
security features of the 3458A.
Chapter 2: Operational Verification provides a short test procedure to verify
that the multimeter is functioning properly.
Chapter 3: Adjustment Procedure gives the procedures for adjusting the
multimeter to obtain best accuracy.
Chapter 4: Performance Verification is comprised of test procedures used to
verify that all parts of the instrument are functioning properly and within
specification. This chapter contains Test Cards for recording the results of each
test.
Chapter 5: Command Summary provides an alphabetical summary of
commands that are used in adjusting and performance testing the 3458A.
Appendix A: 3458A Technical Specifications
Appendix B: Electronic Calibration of the 3458A, Product Note 3458A-3
The information contained in this manual is intended for the use of
service-trained personnel who understand electronic circuitry and are aware
of the hazards involved. Do not attempt to perform any of the procedures
outlined in this section unless you are qualified to do so.
To Next Page
Loading...
