Command Summary 5
Keysight 3458A Calibration Manual 95
96 dci gain 100 µA
97 dci gain 1 mA
98 dci gain 10 mA -ACAL OHMS
99 dci gain 100 mA
100 dci gain 1 A
101 precharge dac
102 mc dac (dac settings to minimize charge coupling from input fets)
103 high speed gain
-ACAL OHMS
104 il (OFF leakage of ohmmeter current source)
105 il2 (input leakage correction used on 1 MW and higher)
106 rin (value of 10 MW attenuator RP7)
107 low aperture
108 high aperture
109 high aperture slope .01 PLC
110 high aperture slope .1 PLC
111 high aperture null .01 PLC -ACAL DCV
112 high aperture null .1 PLC
113 underload dcv 100 mV
114 underload dcv 1 V
115 underload dcv 10 V
const_id Description Constant derived from
To Next Page
Loading...
