243
Keysight InfiniiVision 3000T X-Series Oscilloscopes
User's Guide
15 Measurements
To make automatic measurements / 244
To edit measurements / 246
Measurements Summary / 246
Voltage Measurements / 250
Time Measurements / 257
Count Measurements / 265
Mixed Measurements / 266
FFT Analysis Measurements / 267
Measurement Thresholds / 270
Measurement Window / 272
Measurement Statistics / 272
The [Meas] key lets you make automatic measurements on waveforms. Some
measurements can only be made on analog input channels.
The results of the last eight selected measurements are displayed in the
Measurements list dialog (which can be selected from the right-hand sidebar
menu — see “Select Sidebar Information or Controls" on page 49 and “Undock
Sidebar Dialogs by Dragging" on page 49).
When you add a measurement, it appears at the bottom of the Measurements list
dialog, and cursors that show the portion of the waveform being measured are
automatically displayed. You can change the measurement for which cursors are
displayed by touching the measurement in the list and choosing Track With Cursors
in the popup menu or by selecting the measurement in the Cursors Menu.
To Next Page
Loading...
Need help?
General
