Keysight DSOX3024T - Save;Email;Recall (Setups, Screens, Data); Saving Setups, Screen Images, or Data

321
Keysight InfiniiVision 3000T X-Series Oscilloscopes
User's Guide
20 Save/Email/Recall
(Setups, Screens, Data)
Saving Setups, Screen Images, or Data / 321
Emailing Setups, Screen Images, or Data / 330
Recalling Setups, Masks, or Data / 331
Recalling Default Setups / 333
Performing a Secure Erase / 334
Oscilloscope setups, reference waveforms, and mask files can be saved to internal
oscilloscope memory or to a USB storage device and recalled later. You can also
recall default or factory default setups.
Oscilloscope screen images can be saved to a USB storage device in BMP or PNG
formats.
Acquired waveform data can be saved to a USB storage device in
comma-separated value (CSV), ASCII XY, and binary (BIN) formats.
Any file that can be saved to a USB storage device can also be e-mailed over the
network.
There is also a command to securely erase all the oscilloscope's non-volatile
internal memory.
Saving Setups, Screen Images, or Data
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Save.