CAN/LIN Triggering and Serial Decode 25
Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide 415
1 With LIN selected as the serial decode mode, press [Search].
2 In the Search Menu, press the Search softkey; then, turn the Entry knob to select
the serial slot (Serial 1 or Serial 2) on which the LIN signal is being decoded.
3 Press Search; then, select from these options:
• ID — Finds frames with the specified ID. Press the Frame ID softkey to select
the ID.
• ID & Data — Finds frames with the specified ID and data. Press the Frame ID
softkey to select the ID. Press the Bits softkey to enter the data value.
• Errors — Finds all errors.
For more information on searching data, see “Searching Lister Data" on page 152.
For more information on using the [Navigate] key and controls, see “Navigating the
Time Base" on page 75.
To Next Page
Loading...