454 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
28 I2C/SPI Triggering and Serial Decode
4 In the SPI Bits Search Menu, use the Words softkey to specify the number of
words in the data value; then, use the remaining softkeys to enter the hex digit
values.
5 Press the Data softkey and use the keypad dialog to enter the hexadecimal data
value.
The search pattern is always left-justified in the packet. If you want to search
for a value in the second or higher word, increase the Words count and enter
don't cares ('X's) for the earlier words.
For more information on searching data, see “Searching Lister Data" on page 152.
For more information on using the [Navigate] key and controls, see “Navigating
the Time Base" on page 75.
To Next Page
Loading...