28 Impedance Analyzer
1 Troubleshooting
Step 1. Splash Screen.
The splash screen is displayed with Keysight logo.
If the splash screen is displayed, you can assume that the A60 CPU
Module is functioning correctly.
Step 2. Boot up Screen.
The boot up screen is displayed as shown in Figure 8.
If no selection is made, the system will continue the boot up
process after 3 seconds.
While the splash screen is displayed, if you want to run the BIOS setup
utility, push F2 key on the attached external keyboard as soon as you see
the splash screen. The password to enter BIOS setup utility is agt0nly (0 is
Zero).
Changing BIOS setting may cause malfunction or lower performance of
the instrument.
While the Boot up screen is displayed, if you want to perform system
recovery, select Keysight Recovery System as soon as the Windows Boot
Manager screen is displayed. For details of the system recovery, refer to
the Installation Guide.
Figure 8 Boot up Screen
To Next Page
Loading...
