22 Impedance Analyzer
1 Troubleshooting
Step 1. Splash Screen.
The splash screen is displayed with Keysight logo
If the splash screen is displayed, you can assume that the A60
CPU Module is functioning correctly.
Step 2. Boot up Screen.
The boot up screen is displayed as shown in Figure 8.
If no selection is made, the system will continue the boot up
process after 3 seconds.
NOTE
While the splash screen is displayed, if you want to run the BIOS
setup utility, push F2 key on the attached external keyboard as
soon as you see the splash screen. The password to enter BIOS
setup utility is agt0nly (0 is Zero).
Changing BIOS setting may cause malfunction or lower
performance of the instrument.
NOTE
While the Boot up screen is displayed, if you want to perform
system recovery, select Keysight Recovery System as soon as the
Windows Boot Manager screen is displayed. For details of the
system recovery, refer to the Installation Guide.
To Next Page
Loading...
