Impedance Analyzer 7
Manuals for E4991B
Keysight provides the following three manuals for E4991B. The
latest version of all documentations can be downloaded from
http://www.keysight.com/find/e4991b-manual.
Installation Guide
The installation guide provides start up setup information when
you use the E4991B for the first time, system recovery procedures
and troubleshooting information when Windows cannot boot up.
See this manual first when you use the E4991B for the first time.
Troubleshooting Guide
The troubleshooting guide (this manual) provides troubleshooting
information when operational problems are encountered on the
E4991B. See this manual when you need to troubleshoot the
E4991B.
Online Help
The online help provides the information about the quick start,
measurement operation, programming, built-in VBA, I/O interface
and error message. This is pre-installed in the E4991B. Press the
[Help] hard key on the front panel to open. Quick Start helps in
understanding the E4991B operation quickly.
The latest version of online help is available at:
http://ena.tm.keysight.com/e4991b/manuals/webhelp/eng/
The online help has context sensitive help, which is a great feature
of the E4991B help. It allows you to get information about the
selected softkey by pressing the Help key in the E4991B or by
pressing F1 in a keyboard attached to the E4991B or by clicking
the help button in a dialog box. With context sensitive help, users
can receive information quickly about the area the user is working
in the firmware of the E4991B. It provides information relevant to
the task that needs to be accomplished and reduces the time to
search relevant information required to complete a task.
To Next Page
Loading...
