Keysight Infiniium MSOS804A User Manual

8 Keysight Infiniium S-Series Oscilloscopes User’s Guide
Learning the Side Panel Connectors / 27
Motherboard I/O / 27
AUX OUT / 28
10 MHz REF IN 50Ω /28
10 MHz REF OUT 50Ω /28
AUX TRIG IN 50Ω /28
TRIG OUT / 29
Learning the Oscilloscope Display / 30
Learning the Front Panel Controls (Keys and Knobs) / 32
Using the Setup and Display Controls / 33
Using Auto Scale and Default Setup / 33
Using the Touch Screen / 33
Clearing the Waveform Display / 33
Starting and Stopping Waveform Acquisitions / 34
Adjusting the Horizontal Settings / 35
Adjusting the Horizontal Scale / 35
Adjusting the horizontal trigger position (delay) / 35
Magnifying a part of the waveform using Zoom / 36
Setting the scale, position, and timebase reference point / 36
Adjusting the Vertical Settings / 37
Turning an analog channel on or off / 37
Adjusting an analog channel’s vertical scale and offset / 38
Setting Up Triggers / 39
Setting the oscilloscope to trigger on an edge / 39
Making Measurements and Using Markers / 41
Making a measurement on a waveform / 42
Using quick measurements / 42
Using markers / 43
Controlling digital channels / 43
Decoding serial data / 44
Saving and Printing Data / 45
Forcing a Default Setup / 46
Infiniium hard drive recovery / 46
3 Online Help and Other Information
Accessing the Online Help / 49
Navigating the Online Help / 50

Keysight Infiniium MSOS804A Specifications

General

Brand	Keysight
Model	Infiniium MSOS804A
Category	Test Equipment
Language	English