21
Keysight Infiniium MXR/EXR-Series Real-Time Oscilloscopes
User's Guide
2 Getting Started
Front Panel Connectors / 22
Side Panel Connectors / 23
Knobs and Keys on the Front Panel / 26
Graphical User Interface (GUI) / 28
Connecting Oscilloscope Probes / 30
Verifying Basic Oscilloscope Operation / 31
Default Setup and Autoscale / 32
Starting and Stopping Waveform Acquisitions / 33
Adjusting the Horizontal Settings / 35
Adjusting the Vertical Settings / 39
Trigger Level and Other Controls / 41
Using Markers / 45
Making Measurements / 46
Using Digital Channels and Protocol Decode / 48
This chapter describes how to use the Infiniium MXR/EXR-Series oscilloscope's
inputs and outputs, front panel controls, and user interface.
• The familiar front-panel oscilloscope interface with knobs and keys is optimized
for common tasks and basic measurements.
• With the graphical user interface for the Infiniium MXR/EXR-Series
oscilloscope you can access all of the oscilloscope's configuration and
measurement features through an easy-to-use system of windows, menus,
toolbars, dialog boxes, and buttons.
• You have the option of using either the front panel controls or the user interface
for many common tasks.
To Next Page
Loading...
