Keysight N7555A - Page 135

Electronic Calibration Modules Reference Guide 6-5
Replaceable Parts
2.92 mm Modules and Accessories
2.92 mm Modules and Accessories
Table 6-4 2.92 mm Modules and Accessories
Description
a
a. See “Clarifying the Terminology of a Connector Interface” on page 1-1.
Qty Part Number
Adapters (added with Option 00A – N469xD only)
2.92 mm female to female adapter
2.92 mm male to male adapter
1
1
N4692-60022
N4692-60021
Protective End Caps
2.92 mm -f -f connector cap (for module)
b
2.92 mm -m-m connector cap (for module)
b
2.92 mm -m -f connector cap (for module)
b
2.92 mm female connector cap (for adapter)
d
2.92 mm male connector cap (for adapter)
d
b. Available on the N755xA ECals only.
1
1
1
as required
as required
N7550-40001
N7550-40003
N7550-40002
1401-0202
1401-0208
Gages
d
2.92 mm female pin-depth gage
c
2.92 mm male pin-depth gage
c
c. A 3.5 mm gage is capable of measuring 3.5 mm and 2.92 mm connectors.
1
1
11752-60105
11752-60106
Other
Electronic calibration module reference manual (online)
USB cable, 2 meters
1/2 in to 9/16 in open-ended wrench
d
20 mm, 90 N-cm (8 in-lb) torque wrench
d
5/16 in, 90 N-cm (8 in-lb) torque wrench
d
Spanner wrench
d
Ruggedized plastic storage box for the ECal module and accessories (Option
150)
d
Replacement ruggedized plastic storage box for the ECal module and
accessories
e
d. These items are not included, but can be ordered separately.
e. This item is included, but a replacement can be ordered separately.
1
1
1
1
1
1
1
1
N7550-90002
8121-2671
8710-1770
8710-1764
8710-1765
08513-20014
N7550-60009 –
Refer to
Table 1-1,
“N755xA
Modules”, on
page 1-6.
1540-2345 –
Refer to
Table 1-4,
“N469xD
Modules”, on
page 1-13.