35
Basic Operation
Remote Control
4 Select Display a list...
5 PC will detect the instrument automatically. The item “USB
Test and Measurement Device” displays in the pop- up window.
Select it and press Next.
6 The wizard will guide you through the rest of installation till
the driver is installed.
7 Run Keysight IO libraries suite, the N9320B will be detected
automatically. If not, press Refresh All.
After the configuration, the analyzer is ready for your
programming. For further information on remote control and
programming, please refer to the N9320B Programmer’s
Guide in the N9320B Help Kit CD.
To Next Page
Loading...
