80 Keysight P937xA PXIe Service Guide
Removal and Replacement Procedures
Post-Repair Procedures
5-
Step 12. Keying the instrument configuration model number and serial number.
Refer to the Figure 5-8, both the model number (P937XA) and serial number
(MY/USXXXXXXXX) can be found on the Chassis regulatory plate from the
original unit.
1. Model Number = Model number of the USB VNA
b. Serial Number = Serial number of the USB VNA
Figure 5-8 Regulatory Plate on Chassis
This step is only required if you are replacing the chassis. If you are
replacing only the module, skip this step and continue to the next step.
To Next Page
Loading...
