Keysight Streamline Series - Page 19

Keysight Technologies Startup Guide 1-19
Getting Started
STEP 4. Install the P937xA Network Analyzers
Figure 1-11 P937xA Rear Panel
Feature Description Refer to Figure 1-11 on page 19.
ESD ESD strap connect
2.0 USB
Type A
Slots (x2)
USB 2.0 Type A slot. These slots can be used to connect USB 2.0
compatible PC accessories: (USB memory, keyboard, and mouse)
USB 3.0
To Host PC
USB 3.0 Type C connector. This slot is used to connect your host PC to
your P937xA. Optional ability to mount your USB 3.0 Type C cable using
mountable connector.
10 MHz In SMB male connector. A 10 MHz external reference signal supplied to this
port will only allow cascading reference signals to the 10MHz Out on the
rear panel. The instrument will not lock to this signal.
10 MHz
Out
SMB male connector. This port will supply a 10 MHz (+/-25 ppm) reference
signal for a cascading reference signal. It is independent of the
instrument’s reference signal. Use the front panel Reference Out for an
instrument reference.
Power
15 VDC,
6A Max
Mini-DIN connector. Connect the P937xA power supply to this port.
Trig 1 and
Trig 2
SMB male connector(s). A trigger is a signal that causes the analyzer to
make a measurement sweep. The analyzer offers great flexibility in
configuring the trigger function. P937xA has Trigger 1 and Trigger 2
connectors. See also, the VNA Online Help
(http://www.keysight.com/find/usb-vna).
Lock Kensington security lock