Keysight Technologies Startup Guide 1-7
Getting Started
STEP 2. Check the Shipment
3. Write the following information on a tag and attach it to the network
anal
yzer:
— Name and address of owner. A P.O. box is not acceptable as a return
address.
— Network analyzer serial numbers. The serial number and host ID
labels are located on the bottom of the panel of the P937xA. The
serial number can also be read from the Soft Front Panel (SFP)
interface, after the
hardware is installed.
— Description of the service required or the failure.
4. On the shipping label, write ATTENTION REPAIR DEPARTMENT and the
RMA number.
5. Ship the analyzer using the original packaging materials. Shipping the
analyzer in anything other than the original packaging may result in
non-warranted damage.
STEP 2. Check the Shipment
Use the Contents List in the shipping container and Table 1-1 to verify the
completeness of your shipment. If not complete, refer to “Contacting Keysight”
on page 2.
In your correspondence, refer to the network analyzer by serial number
and by model number.
Table 1-1 P9375A-Kit Contents
Qty Description Part Number
1 External Power Supply Desktop adapter 90-264AC 15VDC 6A 90W 1950-6128
1
China RoHS Addendum for Network Analyzer
9320-6674
1 Keysight safety leaflet 9320-6797
1 Quick start guide P9370-90005
1 Cable-Assembly USB 3.0 Type-A Plug to Type-C Plug 1m-LG PVC
Black
P9375-60010
To Next Page
Loading...
Need help?
General
