Operations and Features 3
Keysight U8001A/U8002A User’s and Service Guide 37
Recalling operating state
1 Press and hold the “Memory” button.
– The M1 annunciator will be turned on.
– The LIMIT annunciator will be turned off.
– The display shows the settings saved in M1 memory location.
2 Turn the knob to show the settings saved in M1, M2 and M3 memory
locations.
– The M1, M2 and M3 annunciators will be turned on in round-robin manner.
3 Press on the “Memory” button if you want to use the shown settings as the
current operating settings
– The M1, M2 and M3 annunciators will be turned off.
To cancel the operation, allow the unit to idle for five seconds.
To Next Page
Loading...
