4-31
WIPERS AND WASHERS
WINDSHIELD WIPERS
The ignition switch must be ON.
To turn the wipers on, pull the windshield
wiper control lever down.
INT - Intermittent wiper operation.
LO - Normal wiper speed
HI - Fast wiper speed
VARIABLE-SPEED
INTERMITTENT WIPERS
(IF EQUIPPED)
Set the knob to the INT position and
choose the desired speed of the wipers
by turning the ring.
ONE-TOUCH WIPERS
For a single wiping cycle, push the
operation switch with the lever in the
OFF position.
NOTICE :
• To prevent possible damage to the
wipers or windshield, do not oper-
ate the wipers when the windshield
is dry.
• To prevent damage to the wiper
blades, do not use gasoline,
kerosene, paint thinner, or other
solvent on or near them.
• To prevent damage to the wiper
arms and other components, do not
attempt to move the wipers manu-
ally.
To Next Page
Loading...
