TRACTION CONTROL
SYSTEM (IF EQUIPPED)
On slippery road surfaces, the traction
control system (TCS) limits the drive
wheels from spinning excesively, thus
helping the car to accelerate. It also
provides improved driving force and
steering performance as the car turns at
accelerated speeds.
CAUTION:
When the TCS indicator blinks, SLIP
control function has been activated. It
also means that the road is slippery or
your car is accelerating excessively. In
this situation, release foot pressure
from the accelerator pedal and main-
tain moderate speed.
WARNING
Traction control is a driving aid; all
normal precautins for driving in
inclement weather and on slippery
road surfaces should be observed.
TCS ON/OFF MODE
In the TCS ON mode, the indicator in the
instrument cluster will not be
illuminated.
The indicator will illuminate when the
ignition key is turned to the “ON”
position, but it should go off after 3
seconds. It means the TCS is in the
stand-by status and at the moment of the
actual operation of the TCS, the indicator
will blink.
To switch to TCS OFF mode, press the
TCS switch. System will be deactivated
and the TCS indicator in the instrument
cluster will illuminate.
If the TCS indicator stays on in the TCS
ON mode, take your car to your
Authorized Kia Dealer and have the
system checked.
4-41