WINDSHIELD
DEFROSTING AND
DEFOGGING
(MANUAL TYPE)
TO DEFOG INSIDE WIND-
SHIELD
1. Set the mode selection switch to the
or position.
When you select or position,
the system automatically turns on the
A/C and outside (fresh) air mode.
2. Set the temperature control knob to the
desired position.
3. Set the fan speed control knob to any
desired speed except “0”.
For maximum defogging, set the fan
speed control knob to the “3” or “4”
position.
TO DEFROST OUTSIDE
WINDSHIELD
1. Set the mode selection switch to the
position.
When you select position, the
system automatically turns on the A/C
and outside (fresh) air mode.
2. Set the temperature control knob to the
extreme right/hot position
3. Set the fan speed control knob to the
“3” or “4” position.
4-55