BATTERY REPLACEMENT
Transmitter uses a battery of 3Volt
lithium type. Normally the battery in
your transmitter is used for several years,
but replace it according to operation
condition.
1. Using the screwdriver, loosen the
screw on the transmitter backside and
use a thin tool to pry open the
transmitter.
2. Disassemble the transmitter and
remove the battery in the backside.
3. Make sure the battery “Plus (+)”
faces up.
CAUTION:
Using the wrong specified battery can
cause the malfunction of the
transmitter. Be sure to use the
standardized goods.
3-5
EMSA3068
To Next Page
Loading...
