To Unfasten the Front
Lap/Shoulder Belt:
Press the release button on the buckle.
REAR LAP BELT (REAR
CENTER SEAT) -
(IF EQUIPPED)
To Fasten the Rear Lap Belt:
1. Grasp the buckle end and pull it low
over the abdomen.
2. Insert the tongue plate into the open
end of the buckle until an audible
“click” is heard, indicating the latch
is locked. Make sure the belt is not
twisted.
3. To lengthen the belt, hold the latch
plate tongue at a right angle to the
safety belt webbing and pull.
4. To shorten the belt, hold the latch
plate tongue at a right angle to the
safety belt webbing and pull on the
loose end of the belt until the desired
belt length is reached.
5. Grasp the free portion of the belt
webbing and pull until the belt is
snug over the hips and as low on the
abdomen as possible.
KNOWING YOUR VEHICLE
3-40
EMSA3026
To Next Page
Loading...
