Manual Remote Control
(If Equipped)
To adjust an outside mirror, move the
control lever which is located at the
forward inside area of the window frame.
Electric Remote Control
(If Equipped)
This switch, located at the armrest on the
driver’s door, controls the adjustments
for both right and left outside mirrors. To
adjust the position of either mirror:
1. Move the selector switch to the right
or left to activate the adjusting
mechanism for the corresponding
mirror.
2. Adjust the mirror angle by
depressing the mirror adjustment
control switch in the desired
direction.
NOTICE:
The mirrors stop moving when they
reach the maximum adjusting angles,
but the motor continues to operate
while the switch is depressed. Do not
depress the switch longer than
necessary or the motor may be
damaged.
3-65
1S2107015
EMSA3052
To Next Page
Loading...
