VEHICLE SETTINGS
11
To enter the User Settings mode in the LCD
Instrument Cluster Modes, press the Mode
button
A
when the vehicle is at a standstill
and with the Engine Start/Stop button in the
ON position and select User Settings .
You can navigate the selections on the display
by pressing the Select/Reset (OK) button
B
up
or down, and then pressing again to enter.
User Settings Modes:
Head-Up Display (HUD)*: Enable HUD, Display Height, Rotation, Brightness, Content
Selection, Speed Size, Speed Color
Driving Assist: Smart Cruise Control (SCC) Reaction*, Driver Attention Warning*,
Lane Safety*, Forward Collision-Avoidance Assist (FCA)*, Forward Collision Warning
(FCW)*, Blind-Spot Collision Warning, Blind-Spot Collision Warning* Sound
Door/Liftgate: Automatically Lock, Automatically Unlock, Two-press Unlock*,
Power Liftgate*, Smart Liftgate*
Lights: One-Touch Turn Signal, Ambient Light Brightness*, Ambient Light Color*,
Headlamp Delay
Sound: Parking Distance Warning Volume*, Welcome Sound*
Convenience: Seat Easy Access*, Steering Easy Access*, Welcome Mirror/Light*,
Wiper/Light Display*, Gear Position Pop-Up*, Icy Road Warning*, Lateral Seat Support
Enhancement*
Service Interval: Service Interval On/Off, Adjust Service Interval, Reset
Other Features: Fuel Economy Auto Reset, Fuel Economy Unit, Temperature Unit, Tire
Pressure Unit, Torque Unit*
Language: Choose the language
Reset: Reset User Settings to factory default
User Settings
CRUISE
CANCEL
RES
OK
SET
(Button layout on right of steering wheel)
A
B
To view videos on your
mobile device, snap
these QR Codes or visit
the listed website. Refer
to inside cover for more
information.
www.youtube.com/KiaFeatureVideos
QR CODE
LCD DISPLAY VIDEO
LCD DISPLAY:
MAINTENANCE VIDEO
See section 4 in the Owner’s
Manual for more information.
When Service Interval Mode is activated, set and vehicle service is required,
the following message will be displayed on the LCD: Service Required, along
with the remaining days/miles till service is due.
Service Interval Mode ON and Interval Setting
To activate Service Interval Mode and set the interval, press the Mode button
A
, scroll to User Settings and press Select/Reset (OK) button
B
to enter.
Then press the OK button
B
up/down to scroll to Service Interval Mode and again to enter. Press the OK
button
B
up/down to select the option to set the interval. Adjust interval and press the OK button
B
to
save. To reset the Service Interval Mode system, press and hold the OK button
B
for more than 1 second.
Service Interval Mode Off
To turn Service Required OFF, go to User Settings and scroll to Service Interval Mode, press the OK button
B
to enter. Select option to deactivate and press the OK button
B
to save.
Service Interval Mode
-20 mi
-5 day
Service required
See section 4 in the Owner’s Manual for more information.
VEHICLE SETTINGS
*IF EQUIPPED ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
To Next Page
Loading...
