21
STEERING WHEEL
CONTROLS
STEERING WHEEL CONTROLS
One-touch
Lane Change
Signal
To operate:
§ Move lever up/down for right/left turn signal
§ Slightly move lever up/down to activate one-
touch lane change signal
Turn Signals (refer to image on page 30)
REMINDERS:
§ One-touch lane change signal is activated by briefly pressing the
turn signal lever slightly for less than 1 second and then releasing.
The lane change signal will blink 3 times
§ To change how many times the lane change signal blinks (3/5/7),
go to User Settings in the LCD instrument cluster modes
For more information on the User Settings Mode,
please refer to your Owner’s Manual.
*IF EQUIPPED ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
To Next Page
Loading...
