Kia stinger 2021 - Electric Parking Brake (EPB)

41
P
R
N
D
AUTO
HOLD
DRIVE MODE
OFF
OFF
P
A
ELECTRIC PARKING
BRAKE / AUTO HOLD
VIDEO
To view a video on your
mobile device, snap this
QR Code or visit the listed
website. Refer to inside
cover for more information.
www.youtube.com/KiaFeatureVideos
QR CODE
§ Pull up and hold EPB switch again to increase
brake pressure if parked on a decline or incline
§ When leaving your keys with parking lot
attendants or valet, make sure to inform them
how to operate the EPB
§ If parked on a steep incline, pull up the EPB
switch for more than 3 seconds for a firmer EPB
application
QUICK TIPS
See section 5 in the Owner’s Manual for more information.
The Electric Parking Brake (EPB) system utilizes an electric motor to engage
the parking brake.
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
A
. Ensure that the
indicator light is illuminated on the instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed in Reverse or
Drive. To release EPB manually, depress the brake pedal, then press the
EPB switch
A
, with the ignition switch in the ON position. Ensure that the
indicator light is OFF.
Electric Parking Brake (EPB)*
REMINDERS:
§ The EPB malfunction indicator will illuminate for approximately 3 seconds
as a bulb check when the ignition switch is turned ON
§ If the warning light does not illuminate temporarily or remains
continuously lit, take your vehicle to an authorized Kia dealer and have
the system checked
§ The EPB should not be operated while the vehicle is moving
§ A click or electric brake motor sound may be heard while operating or
releasing the EPB. These conditions are normal and indicate that the EPB
is functioning properly
§ EPB will not release unless the hood, liftgate and all doors are closed and
seat belts are fastened
CENTER PANEL
CENTER PANEL
*IF EQUIPPED ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.