EasyManua.ls Logo

Kia XCEED PHEV MY21 - Armed Stage; Theft-Alarm System

Kia XCEED PHEV MY21
636 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
5
5
Features of your vehicle Theft-alarm system
Theft-alarm system
Vehicles equipped with a theft alarm
system will have a label attached to
the vehicle with the following words:
1. WARNING
2. SECURITY SYSTEM
This system is designed to provide
protection from unauthorized entry
into the car. This system is operated
in three stages: the first is the
Armed stage, the second is the
Theft-alarm stage, and the third
is the Disarmed stage. If triggered,
the system provides an audible
alarm with blinking of the hazard
warning lights.
Armed stage
Using the smart key
Park the vehicle and stop the
engine. Arm the system as
described below.
1. Turn off the engine.
2. Make sure that all doors (and tail
-
gate) and the engine hood are
closed and latched.
Lock the doors by pressing the
button of the front outside
door handle with the smart key
in your possession.
After completion of the steps
above, the hazard warning
lights operate once to indicate
that the system is armed.
If any door remains open, the
doors wont lock and the chime
will sound for 3 seconds. Close
the door and try again to lock
the doors.
If tailgate or engine hood
remains open, the hazard
warning lights wont operate
and theft-alarm will not arm.
After this, if the tailgate and
engine hood are closed, the
hazard warning lights will blink
once.
Lock the doors by pressing the
lock button on the smart key.
After completion of the steps
above, the hazard warning
lights will operate once to indi
-
cate that the system is armed.
CD_PHEV_LHD_features_driving.book Page 15 Thursday, November 14, 2019 10:22 PM

Table of Contents

Related product manuals