Kia XCEED PHEV MY21 - Light Bulbs

Maintenance
688
Light bulbs
Light bulbs
Bulb replacement precaution
Please prepare bulbs with appropri -
ate standards in case of emergen -
cies. Refer to "Bulb wattage" on
page 9-3.
When changing bulbs and sorts, first
turn off the engine at a safe place,
firmly apply the side brake and take
out the battery's negative (-) termi
-
nal.
WARNING
Working on the lights
Prior to working on the light, firmly
apply the parking brake, ensure that
the ENGINE START/STOP button is
in OFF position and turn off the
lights to avoid sudden movement of
the vehicle and burning your fingers
or receiving an electric shock.
Use only the bulbs of the specified
wattage.
WARNING
Be sure to replace the burnedout
bulb with one of the same wattage
rating. Otherwise, it may cause
extensive wiring damage and possi
-
ble fire.
CAUTION
If you don't have necessary tools,
the correct bulbs and the expertise,
consult a professional workshop. Kia
recommends to consult an autho
-
rized Kia dealer/service partner.
In many cases, it is difficult to
replace vehicle light bulbs because
other parts of the vehicle must be
removed before you can get to the
bulb. This is especially true if you
have to remove the headlight
assembly to get to the bulb(s).
Removing/installing the headlight
assembly can result in damage to
the vehicle.
CAUTION
䳜 If unauthentic parts or substan -
dard lights are used when chang -
ing lights, it may lead to fuse
disconnection and malfunction,
and other wiring damages.
䳜 Do not install extra lamps or LED
to the vehicle. If supplementary
lights are installed, it may lead to
lamp malfunction and flickering of
the lights. In addition, the fuse
box and other writing may be
damaged.
CD_PHEV_LHD.book Page 68 Tuesday, November 12, 2019 11:29 PM