81
5
5
Features of your vehicle LCD windows
and approaching reduced speed
zones.
䳜 User settings
Press the ENGINE START/STOP
button and put the shift lever in
P(Park). In the User Settings
Mode, select Driver assistance,
Coasting Guide, and then On to
turn on the system. Cancel the
selection of coasting guide to turn
off the system. For the explana
-
tion of the system, press and hold
the [OK] button.
䳜 Operation conditions
To activate the system, take the
following procedures. Enter your
destination information on the
navigation and select the driving
route. Select the ECO mode in the
Integrated Driving Control Sys
-
tem. Then, satisfy the following:
- The driving speed should be
between 60 km/h(37 mph) and
160 km/h(99 mph).
* The operating speed may vary due
to difference between instrument
cluster and navigation effected by
tire inflation level.
Unplug vehicle to start
The message is displayed when you
start the engine without unplugging
the charging cable. Unplug the
charging cable, and then start the
vehicle.
Remaining Time
The message is displayed to notify
the remaining time to fully charge
the battery.
Shift to P to charge
The message is displayed when the
charging connector is plugged with
the shift lever in R (Reverse), N
(Neutral) or D (Drive). Move the shift
lever to P (Park) and re-start the
charging process.
Electric mode/Automatic mode/
Hybrid mode
A corresponding message is dis
-
played when a mode is selected by
pressing the HEV button.
Low battery. Maintaining Hybrid
mode
This message is displayed when
unable to convert to EV mode even
when pressing the HEV button
during HEV mode driving due to
insufficient high-voltage (hybrid)
battery level.
Low system temperature. Switch
-
ing to Hybrid mode/ High system
temperature. Switching to Hybrid
mode
This message is displayed when the
temperature of the high-voltage
(hybrid) battery is too low or high.
CD_PHEV_LHD_features_driving.book Page 81 Thursday, November 14, 2019 10:22 PM
To Next Page
Loading...
